Description
1 inch DQC W-Series Wingstyle Interchange Female Coupler. Designed for applications requiring a coupling that can be connected under residual pressure with minimum spillage and air inclusion. Widely used on dump trailer wet-line hydraulic systems and oil field equipment. Not recommended for continuous hydraulic impulse applications.
- Anti-Extrusion Seal-Pack- Superior Longevity
- Compact Body Profile- Reduction of Side-Load Stress
- Compatibility & Interchange Data: Aeroquip 5100-Series, Parker 6100-Series, Snap-Tite 78-Series, Faster Series-FB, Safeway S51-Series
- Couplings have a TPC-EPT back-up ring on the valve sleeve to extend service life.
- Hybrid Valve Guide- Improved Flow & Pressure Performance
- Machined components are manufactured using solid bar stock
- Nitrile (Buna-N) seals are standard
- Bonded Flange Valve- Improved Pressurized Connection Service
- Full Hex- Ease of Installation
- Main coupler valve has a bonded face-seal to improve seal integrity during pressurized connection/disconnection.
- Redundant O-Ring on the coupler body will engage nipple for secondary sealing support.
- Rugged steel wing nut for threaded connect and disconnect operation.
- Stainless steel retaining rings and springs maximize corrosion resistance and extend service life.
Tech Specs
| Body Size | 1″ |
|---|---|
| Burst Pressure | 16,000 PSI (1,103 bar) |
| End Connection | Female NPTF |
| Hex | 1-15/32″ |
| Length | 3.33″ (84.6 mm) |
| Material | Brass |
| Maximum OD | 4.49″ (114.0 mm) |
| Maximum Operating Pressure | 4,000 PSI (276 Bar) |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Thread Size | 1″ – 11-1/2 |
| Weight (lbs) | 1.930 |
Account
Categories
Car filter
Search
Compare
Top
Reviews
There are no reviews yet.